Stage Hoist
Heavy Duty Lighting Hoist with up to 18 m (59’) long traveling connector strip / lighting bar assembly for up to 48 lighting circuits.
The new modular IFF Stage Hoist offers a wide range of design options for onstage electric hoists, front of house lighting hoists and scenery hoists. The drive unit and the four diverter pulleys are mounted stationary to the ceiling. The moving sections of the Stage Hoist is connector strip/batten assembly.
The modular design combined with a wide range of bracket kits offers a simple and fast installation. The IFF pile-on winding drums eliminate any risk of cross winding during operation. The FF3915 Stage Hoist is CE tested and approved as a complete system.
| Product Code | FF3915 |
|---|---|
| Category | Heavy Duty Lighting Hoists |
| Brand |
|
Stage Hoist
FF3915
- Modular and easy to install
- Available with connector Strip, Truss or Batten pipe with length from 8 to 21m (26’ to 68’)
- All safety switches located on the Motor Winch Unit for fast and economic installation
- Pile-on Winding Drums eliminate any risk of cross winding
- Ideal for on stage and front of house lighting
- Connector strip up to 18 m (59')
- Lighting bar: up to 19.5 m (64')
- Travel: up to 14 m (46’)
- Lighting circuits: 12/18/24/30/36/42/48
- Cat 5: 2/4/6
- Video and audio connections optional
- Adjustable operating limits
- Overload detection
- Slack wire detection
- Over travel limits
- Thermal motor protection
Stage Hoist
FF3915
| Code | Travel | Safe working load | Self-Weight | |||
| FF3915Y110 | 11 m | 36' | 730 kg | 1600 Lbs | 230 kg | 507 Lbs |
| FF3915Y140 | 14 m | 46' | 630 kg | 1400 Lbs | 230 kg | 507 Lbs |
| Motor | CE | UL (E217891) / CSA |
| Power | 2.2 kW | 2.5 HP |
| Voltage | 400 VAC (3-phase) | 208 VAC (3-phase) |
| Lifting speed (average) | 9 m/min | 30 FPM |
| Lifting cable | 4 mm carbon steel aircraft cable | |
| Safety Switches | ||
| Operating limits | 2 adjustable limits | |
| Over travel protection | 2 lower and upper limits (factory preset) | |
| Slack wire detection | 1 for each steel cable | |
| Overload detection | 1 for each pick-up point | |
| Lighting bar | ||
| Pipe ø50mm (2") | 8 m to 19.5 m | 26' to 64' |
| Triangular truss | 8 m to 21 m | 26' to 68' |
| Connector strip | ||
| Folded steel | 8 m to 18 m | 26' to 59' |
| Lighting circuits | 12 / 18 / 24 / 30 / 36 / 42 / 48 | |
| Receptacles | On request | On request |
| Cat 5 | 8 | 8 |
| Mounting brackets | ||
| FF3907BUKIT | Brackets for Unistrut Channel - set of 6 pcs | |
| FF3907BAKIT | Brackets for Wide I-Beam (60-100 mm Flange base) - set of 6 pcs | 2.5'' - 4'' Flange base |
| FF3907BBKIT | Brackets for Wide I-Beam (100-150 mm Flange base) - set of 6 pcs | 4'' - 5.9'' Flange base |
| FF3907BCKIT | Brackets for 48.8 mm pipe | 2'' pipe |
Note: Unistrut Channels, I-Beams or steel pipes must be in line with the stage hoist. Please contact IFF for special mounting solution requirements.
| Dimensions | Min | Max | Min | Max |
| A | 1.25 m | 2.5 m | 4' | 8' |
| B | 2.5 m | 5 m | 8' | 16' |
| C | 8 m | 18 m | 26' | 60' |
| D | 8 m | 19.5 m | 26' | 64' |
| H | 1 m | 1.3 m | 3' 3'' | 4' 3'' |
