STUDIO LED X5 - LED FRESNEL 180W TUNGSTEN
The STUDIO LED X SERIES range combines the matchless features of the renowned QUARTZCOLOR Fresnel spotlights with the advantages of the LED technology innovation.
A high performing professional LED Fresnel spotlight range whose light output is equivalent to a traditional halogen source and permits a one-for-one replacement without compromises in the quality of the light: same brightness, same smoothness, same even and shadowless illumination as a traditional Fresnel spotlight.
Investing in LED fixtures brings immediate benefits in terms of savings: dramatically reduced power consumption, 50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirements, no dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.
Product Code | LD27262T |
---|---|
Category | LEGACY PRODUCTS |
Brand |
STUDIO LED X5 - LED FRESNEL 180W TUNGSTEN
LD27262T
- LCD GRAPHIC DISPLAY
High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.
- BUILT-IN UNIVERSAL POWER SUPPLY
More compact for easy operation.
- ON-BOARD CONTROL
On-board potentiometer to control the dimming level.
- DMX RDM CONTROL
The RDM standard provides bi-directional feedback and the possibility to remotely assign and address all the fixtures in a DMX network.
- 16-bit ELECTRONIC DIMMING
Fully dimmable 0 – 100 %. The 16-bit electronic driver ensures accurate and precise dimming.
- ON-BOARD USB-PORT
On-board USB port for firmware upgrade, diagnostic testing, and parameters setting via PC dedicated software.
- Optimised combination of steel, die cast and aluminium for both sturdiness and lightweight
- High-quality epoxy powder coating protects against corrosion
- Scratch resistant black non-reflective housing
- Specifically designed optics with large size lens
- Side mounted pole operated focus mechanism easily repositioned to manual use
- Stainless steel wire focus system for a smooth and precise focusing action, maintenance-free
- High-efficiency convection cooling, super silent fan, 3 presetting fan speed
- Die cast aluminium accessory support brackets positioned in an X shape for true barndoor rotation
- Easy running accessory support brackets and lower accessory support bracket fitted with barndoor safety catch (extra safety)
- Spring loaded top hinged bracket for very quick opening and closing, and for easy accessory fitting and removal
- Hinged lens door allows easy access for lamp replacement
- Front rigging hook
- Easy to service and maintain
- Compatibility of parts throughout the range
- CE mark
- Designed and manufactured in Italy
Ordering Codes
LD27260T - Studio LED X5 Fresnel 180W CCT Tungsten MO supplied with manual stirrup, stainless steel safety mesh, four-leaf rotating barndoor
LD27262T - Studio LED X5 Fresnel 180W CCT Tungsten PO supplied with pole operated stirrup, stainless steel safety mesh, four-leaf rotating barndoor
STUDIO LED X5 - LED FRESNEL 180W TUNGSTEN
LD27262T
Operational Data |
|
Power consumption |
180 W |
Supply voltage |
100 – 260 Vac, 50 – 60 Hz, autosensing |
Power factor (cosα) | 0.97 |
Tilt adjustment |
Pivot located at centre of gravity for excellent balance and positive locking |
Tilt recommended angle of use |
-90° / 0° / 90° |
Focus adjustment |
Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system |
Accessory fitting |
Spring loaded top hinged bracket Lower accessory support bracket fitted with barndoor safety catch (extra safety) |
Barndoor diameter |
323 mm |
Colour frame/scrim set diameter |
325 mm |
Filter cut size diameter |
320 mm |
Safety mesh |
Stainless steel safety mesh 25 mm x 25 mm |
IP rating |
IP 20 |
Max operating ambient temperature |
0° – 40° |
Optical Data |
|
Lens |
Fresnel 250 mm Ø, low expansion borosilicate Fresnel lens on spring Teflon supports |
Beam angle |
16° to 71° |
Correlated color temperature | 3200 K |
CRI | > 90 |
Mechanical Data |
|
Finish |
Black high-quality epoxy powder coating Special extra high-temperature treatment in critical areas External textured low gloss finish |
MO mounting |
Manual U-shaped stirrup with lateral thrust bearing and lock off knob for quick and secure locking, 28 mm (1 1/8”) |
PO mounting |
Pole Operated U-shaped stirrup, pan & tilt clutch gear mechanism for manual override, 28 mm (1 1/8") spigot |
Electrical |
|
Dimming | Electronic 16-bit, 0 – 100 % fully adjustable |
Control | Local via potentiometer Remote via DMX-RDM Setting, addressing and testing via control panel, via RDM, and via USB port |
Connections | DMX In and Through 5-Pin XLR, USB port for firmware and software upgrade |
MO version |
In-line switch 10 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable |
PO version |
2 m bare ended, 3 x 1.5 mm2 section cable Plugs and cables upon request |
Dimensions |
|
Weight (head) |
12.7 kg manual version 13.6 kg pole op version |
Packed volume |
580 mm x 480 mm x 590 mm |
Technical Drawings
Photometrics
Spot (16°) | |||||
Distance (m) | 3 | 4 | 5 | 7 | 9 |
Lux | 6,360 | 3,578 | 2,290 | 1,168 | 707 |
Beam Ø (m) | 0.84 | 1.12 | 1.41 | 1.97 | 2.53 |
Flood (71°) | |||||
Distance (m) | 3 | 4 | 5 | 7 | 9 |
Lux | 1,150 | 647 | 414 | 211 | 128 |
Beam Ø (m) | 4.28 | 5.71 | 7.13 | 9.99 | 12.84 |
Typical performance based on 3200 K |
STUDIO LED X5 - LED FRESNEL 180W TUNGSTEN
LD27262T
28070 Four-leaf rotating barndoor - 323 mm Ø |
28093 Colour frame - 325 mm Ø |
28306 Scrim set (one double, one single scrim, one half double scrim, one half single scrim) - 325 mm Ø |
C100 Junior pipe clamp with 28 mm socket |
FF3871 Steel safety cable - Ø 4 mm - 70 cm length |
A1020B Aluminium stand, 2 risers, 110/198 cm, 28/16 mm socket, black, 25 kg load |
087NW Wind up steel chrome stand, 2 risers, 167/370 cm, 28/16 mm socket, 30 kg load |