STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN
The STUDIO LED X SERIES range combines the matchless features of the renowned QUARTZCOLOR Fresnel spotlights with the advantages of the LED technology innovation.
A high performing professional LED Fresnel spotlight range whose light output is equivalent to a traditional halogen source and permits a one-for-one replacement without compromises in the quality of the light: same brightness, same smoothness, same even and shadowless illumination as a traditional Fresnel spotlight.
Investing in LED fixtures brings immediate benefits in terms of savings: dramatically reduced power consumption, 50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirements, no dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.
| Product Code | LD27642T |
|---|---|
| Category | LEGACY PRODUCTS |
| Brand |
|
STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN
LD27642T
- LCD GRAPHIC DISPLAY
High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.
- BUILT-IN UNIVERSAL POWER SUPPLY
More compact for easy operation.
- ON-BOARD CONTROL
On-board potentiometer to control the dimming level.
- DMX CONTROL
DMX control by XLR5 IN and THROUGH connectors.
- 16-bit ELECTRONIC DIMMING
Fully dimmable 0 – 100 %. The 16-bit electronic driver ensures accurate and precise dimming.
- Lightweight and compact, ideal for location work and architectural applications
- Optimised combination of die cast and aluminium for both sturdiness and lightweight
- High-quality epoxy powder coating protects against corrosion
- Scratch resistant black non-reflective housing
- Specifically designed optics with large size lens
- Side mounted pole operated focus mechanism easily repositioned to manual use
- High-efficiency convection cooling, super silent fan, 3 presetting fan speed
- Easy running accessory support brackets and lower accessory support bracket fitted with barndoor safety catch (extra safety)
- Spring loaded top hinged bracket for very quick opening and closing, and for easy accessory fitting and removal
- Easy to service and maintain
- Compatibility of parts throughout the range
- CE mark
- Designed and manufactured in Italy
Ordering Codes
LD27640T – Studio LED X3 Fresnel 90W CCT Tungsten MO supplied with manual stirrup, stainless steel safety mesh, four-leaf rotating barndoor
LD27642T - Studio LED X3 Fresnel 90W CCT Tungsten PO supplied with pole operated stirrup, stainless steel safety mesh, four-leaf rotating barndoor
STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN
LD27642T
|
Operational Data |
|
|
Power consumption |
90 W |
|
Supply voltage |
100 – 260 Vac, 50 – 60 Hz, autosensing |
| Power factor (cosα) | 0.97 |
|
Tilt adjustment |
Pivot located at centre of gravity for excellent balance and positive locking |
|
Tilt recommended angle of use |
-90° / 0° / 90° |
| Focus adjustment |
Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system |
| Accessory fitting |
Spring loaded top hinged bracket Lower accessory support bracket fitted with barndoor safety catch (extra safety) |
|
Barndoor diameter |
200 mm |
|
Colour frame/scrim set diameter |
202 mm |
|
Filter cut size diameter |
197 mm |
|
Safety mesh |
Stainless steel safety mesh 25 mm x 25 mm |
|
IP rating |
IP 20 |
|
Max operating ambient temperature |
0° – 40° |
|
Optical Data |
|
|
Lens |
Fresnel 130 mm Ø, low expansion borosilicate Fresnel lens on spring Teflon supports |
|
Beam angle |
21° to 68° |
| Correlated color temperature | 3200 K |
| CRI | > 90 |
|
Mechanical Data |
|
| Finish |
Black high-quality epoxy powder coating Special extra high-temperature treatment in critical areas External textured low gloss finish |
|
MO mounting |
Manual U-shaped stirrup with lateral thrust bearing and lock off knob for quick and secure locking, 28 mm (1 1/8”) |
|
PO mounting |
Pole Operated U-shaped stirrup, pan & tilt clutch gear mechanism for manual override, 28 mm (1 1/8") spigot |
|
Electrical |
|
| Dimming | Electronic 16-bit, 0 – 100 % fully adjustable |
| Control | Local via potentiometer Remote via DMX Setting, addressing and testing via control panel |
| Connections | DMX In and Through 5-Pin XLR |
| MO version |
In-line switch 8 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable |
| PO version |
2 m bare ended, 3 x 1.5 mm2 section cable Plugs and cables upon request |
|
Dimensions |
|
| Weight (head) |
5.3 kg manual version 6.4 kg pole op version |
| Packed volume |
520 mm x 420 mm x 520 mm |
Photometrics
| Spot (21°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 2,060 | 1,159 | 742 | 378 | 229 |
| Beam Ø (m) | 1.11 | 1.48 | 1.85 | 2.59 | 3.34 |
| Flood (68°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 590 | 332 | 212 | 108 | 66 |
| Beam Ø (m) | 4.05 | 5.40 | 6.75 | 9.44 | 12.14 |
| Typical performance based on 3200 K | |||||
STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN
LD27642T
|
28846 Four-leaf rotating barndoor - 200 mm Ø |
|
28849 Colour frame - 260 mm Ø |
|
28844 Scrim set (one double, one single scrim, one half double scrim, one half single scrim) - 260 mm Ø |
|
C100 Junior pipe clamp with 28 mm socket |
|
FF3870 Steel safety cable 2.5 mm Ø - 70 cm lenght |
|
1004BAC Aluminium stand, 3 risers, 124/366 cm, air cushioned, 16 mm spigot, black, 9 kg load |
|
1005BAC Aluminium stand, 2 risers, 118/273 cm, air cushioned, 16 mm socket, black, 10 kg load |